Log Stain and Chinking from Perma-Chink, Woodguard, and Sikkens
 
Log stain and chinking products from Perma-Chink and Woodguard
Woodguard & Perma-Chink for Log Home Maintenance  









 
   
  PermaChink PermaChink
   
  PermaChink

PermaChink Color Chart
PermaChink More Information 		 

Outlast Wood Seal
Outlast Wood Seal is a semi-transparent stain concentrate that has been formulated specifically for preserving the beauty of exterior decks, railings, and wood furniture. It is ideal for new construction or existing wood decks, railings, outdoor furniture that have been cleaned and prepped. Outlast is the perfect blend of resins, waterproofing agents, UV inhibitors and semi-transparent iron oxides in a base designed to stop the unsightly graying of wood. Just add four gallons of Mineral Spirits to each gallon of Outlast Wood Seal Concentrate and you are ready to stain your outdoor wood.
Outlast Wood Seal
  1 Gallon Pail
$78.75
 
  5 Gallon Pail
$224.75
 
     
Color Size
Qty


WHAT ARE THE ADVANTAGES OF USING OUTLAST WOOD SEAL?

  • Excellent water repellency·
  • Halts warping, checking and the splitting of unprotected wood that swells and shrinks under the influence of rain and sun.·
  • Resists the growth of mold and mildew·
  • Never hides the grain or beauty of natural wood surfaces

HOW MUCH AREA WILL OUTLAST WOOD SEAL COVER?

A one gallon pail of Outlast that has been mixed with four gallons of Mineral Spirits will cover 1000 SF of outdoor wood with a single coat. The factory recommends a two coat initial application of Outlast so the net coverage of two coats of Outlast mixed with Mineral Spirits is 500 SF of outdoor wood.

HOW DO YOU APPLY OUTLAST WOOD SEAL?

Never apply Outlast Wood Seal without dilution. Mix each gallon of Outlast concentrate with four gallons of Mineral Spirits.

  1. Prepare the wood for treatment by cleaning thoroughly with X-180 Weathered Wood Restorer. Use a pressure washer set between 800 and 1200 psi to remove deposits of mold and mildew. Allow the wood to dry.
  2. Dilute each gallon of Outlast Wood Seal concentrate with four gallons of Mineral Spirits. Mix thoroughly.
  3. It is important that Outlast be completely mixed with Mineral Spirits. Use of a mixing blade on a hand drill or similar apparatus is recommended.
  4. Apply the diluted Outlast with a brush, roller, or staining pad.
  5. Although Outlast will not settle in its concentrated state, it may settle after dilution. During application stir Outlast regularly every 15 minutes.
  6. A second coat of Outlast should be applied within three to six hours depending on the heat and humidity. Two coats of Outlast will ensure long lasting beauty.
  7. Allow to dry overnight before walking on decks or using wood furniture.

WHAT CAUTION STATEMENTS SHOULD I BE AWARE OF?

Avoid contact with eyes as irritation may occur. FIRST AID: In case of contact, immediately flush with water for at least 15 minutes. Get medical attention if irritation persists. Please refer to the MSDS for more specific safety information. KEEP OUT OF THE REACH OF CHILDREN. For spills, leaks or Medical Emergencies, call Infotrac at 800-535-5053.

WHAT IS THE BEST WAY TO MAINTAIN A DECK TREATED WITH OUTLAST WOOD SEAL?

Apply Two Coats of Outlast the first year, then one coat every other year or so as needed.Atmospheric pollutants and ordinary abrasive foot traffic will leave dirt on deck surfaces. Rainwater alone does not wash such deposits away. After a consistent rain, squeegee the deck surface. (Note: On stubborn dirt areas use a mild dish detergent and water solution with a mild brushing action to remove dirt, and then rinse with water.) In the spring and fall wash your deck with X-180 Weathered Wood Restorer.