HOW DOES LIFELINE INTERIOR WORK?

LIFELINE INTERIOR's unique, breathable formula allows natural wood moisture to dissipate from the wood, yet forms a durable, water and odor-repellent surface coat.

WHAT ARE THE BENEFITS OF USING LIFELINE INTERIOR?

• Reduces the absorption of normal fireplace and cooking odors into the wood.
• Eliminates the need to worry about spills and water marks.
• Provides the toughness, clarity and durability of polyurethane and the application advantages of lacquer.
• Is non-yellowing and virtually odorless.
• Is designed to look its best for a minimum of eight years.
  

• Spreads easily and evenly with a brush or airless sprayer.
• Acrylic Satin Topcoat can be brushed on, wiped on with a sponge, or sprayed on with an airless sprayer.
• Cleans up quickly and easily with soap and water.

LIFELINE INTERIOR is VOC compliant and meets all current state and federal air quality requirements.
LIFELINE INTERIOR is FDA approved for use on wood articles having incidental food contact.
LIFELINE INTERIOR contains no caustic dryers with dangerous, lingering odors.
HOW MUCH AREA WILL LIFELINE INTERIOR COVER?

LIFELINE INTERIOR Sealer Acrylic Interior Clear Finish

300 sq. ft./gallon* 500 sq. ft./gallon*
(1,500 sq. ft./5 gallon bucket) (2,500 sq. ft./5 gallon bucket)

* These figures are for smooth finished wood. On rough wood, coverage will be less and vary greatly, depending on roughness and porosity of the wood.

NOTE: LIFELINE INTERIOR Sealer requires 1-2 coats, depending on the desired color. LIFELINE INTERIOR Acrylic Satin Topcoat requires 2 or more coats, depending on the desired amount of sheen.

HOW DO I APPLY LIFELINE INTERIOR?

For best results, apply LIFELINE INTERIOR in temperatures of 40-90 degrees Fahrenheit, out of direct sunight.
LIFELINE INTERIOR Sealer:

1. Remove and replace any deteriorated or decayed wood. Wood that is stained should be restored using readily available cleaners and restorative products prior to application of LIFELINE INTERIOR.

2. Surface should be free from mill glaze and contaminates including dirt, dust, old finishes, water repellents, wax and mildew. Use appropriate materials to prepare surface, being sure to rinse thoroughly. Do not use steel wool. Allow wood to dry completely before applying LIFELINE INTERIOR.

3. Mix LIFELINE INTERIOR thoroughly before and every 15 minutes during application. Apply to all surfaces with a brush or airless sprayer. To avoid lap marks, work wet into dry areas, maintaining a wet edge. Back brushing is required (with each coat) to help work the finish into wood fibers for optimum penetration and longer lasting protection. Remember that LIFELINE INTERIOR Acrylic Satin topcoat is unlike paints and oilborne stains... A THIN COAT IS BEST AND MOST DURABLE.

4. If a second coat is needed to achieve the desired color, wait two hours. The first coat should be dry to the touch before applying the second coat. Apply no more than two color coats on the first application.

5. Work area and equipment should be cleaned immediately with warm soapy water. Rinse sprayers as per manufacturer's directions. Allow equipment to dry thoroughly.

ACRYLIC INTERIOR CLEAR FINISH

1. Apply over completely dry LIFELINE INTERIOR Sealer with a fine-bristle brush, an airless sprayer or a sponge. Remember that Acrylic Interior Clear Finish is unlike paints and oilborne stains... A THIN COAT IS BEST AND MOST DURABLE.

2. Wait two hours. The first coat should be dry to the touch before applying any additional coats.

3. Work area and equipment should be cleaned immediately with warm soapy water. Rinse sprayers as per manufacturer's directions. Allow equipment to dry thoroughly.

NOTE: If additional coats are needed to achieve the desired sheen, allow the first coat to dry completely before applying.

WHAT IS THE DRYING TIME FOR THESE PRODUCTS?

Both dry to the touch in one hour and completely cure in 72 hours.

HOW DO I STORE LIFELINE INTERIOR AND ACRYLIC INTERIOR CLEAR FINISH?

In ideal conditions, LIFELINE INTERIOR can last up to one year. Store it in a clean, dry place, out of direct sunlight. Do not allow the material to freeze!