• Dries in one hour
• Multiple coats can be applied same day
• No toxic fumes
• Clear non-yellowing formulation
• Abrasion resistant
• Detergent and water cleanup
  

HOW DO YOU PREPARE YOUR FLOORS FOR SURE SHINE?

Unfinished Wood Floors should be dry, free from all dust, dirt, oils, and grease. For best results, wipe the entire area to be finished with a tack rag prior to applying finish.

WHAT IS THE BEST WAY TO APPLY SURE SHINE?

Use a synthetic pad applicator, synthetic bristle brush or foam brush. DO NOT USE ROLLER or other applicator that will apply thick coats.

SURE SHINE APPLICATION INSTRUCTIONS:

Stir contents before using, do not shake or agitate as this causes excessive foam.

STEP 1: Apply first coat as a sealer without thinning.

STEP 2: Apply finish in the same direction as the wood grain with approved applicator in smooth, even strokes. Always apply thin coats.

STEP 3: Allow product to dry, and then sand lightly with fine sandpaper or screen. Do not allow sanding procedure to build up excessive heat.

RE-COAT:Allow product to dry for 1-2 hours between coats and sand lightly between coats. A minimum of three coats is recommended for interior surfaces. Light traffic may be allowed within 12 hours. Avoid placing rugs or moving furniture over finish for about one week.

CLEAN UP: Clean all tools with soap and warm water as soon as possible after use.

WHAT IS THE ESTIMATED COVERAGE WITH SURE SHINE?

Between 600 and 800 square feet per gallon per coat.